Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Insulation Question

who's talking here?

Sakebomb 4
lotsmore 1
Denise C 3
MissT 1
Fallon 1
RRay 1

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

Sakebomb --- 20 years ago -

Ok. I just had my ducts replaced and man what a difference. My next project is to put new insulation in the attic since the original stuff is almost gone.

My question is which insulation is better. The blow in or the rolls? Also, what R#? 

Denise C --- 20 years ago -

I hear the roll and r value 30...that's what my husband said 

Denise C --- 20 years ago -

I hear the roll and r value 30...that's what my husband said 

MissT --- 20 years ago -

The blow - you can be sure it gets into areas where the roll cannot. 

Fallon --- 20 years ago -

Yeah, Ray had this done recently so he may can recomment who they used. But I think we were told the spray is better. It will make a difference. 

Denise C --- 20 years ago -

Types of Insulation

There are four basic types of insulation: loose fill, batts and blankets, rigid board and spray foam. The most appropriate type of insulation to use will vary based on the type of construction, the extent of the rehabilitation planned and applicable code requirements.

Loose-fill Insulation

Loose-fill insulation includes loose fibers or fiber pellets that are blown into building cavities or attics using special equipment. It generally costs more than batt insulation. However, it usually fills nooks and crannies easier, reduces air leakage better, and provides better sound insulation than natt-type insulation.

Cellulose fiber, made from recycled newspapers, is chemically treated for fire and moisture resistance. (Check that the bags are clearly labeled to indicate that the material meets federal specifications for fire resistance). It can be installed in walls, floors or attics using a dry-pack process or a moist-spray technique.

Fiberglass and rock wool loose-fill insulation provide full coverage with a "Blow-in Blanket" System (BIBS) that involves blowing insulation into open stud cavities behind a net.

Loose-fill insulation typically has a value of approximately R-3 to R-4 per inch. Cellulose fiber has approximately 30% more insulating value than loose-fill rock wool for the same number of inches installed.

More information about loose-fill insulation is available from the Department of Energy.

Batt and Blanket Insulation

Batt and blanket insulation is made of mineral fiber -- either processed fiberglass or rock wool -- and is used to insulate below floors, above ceilings, and within walls. Generally, batt insulation is the least expensive wall insulation material but requires careful installation for effective performance.

This type of insulation is best suited to a standard joist, rafter, or stud spacing of 16 or 24 inches. Batts and blankets come in widths to fit securely between the wood-framing members. Some come with a radiant barrier backing. Batts generally come in lengths of 4 or 8 feet. Blankets come in long rolls that are cut to the desired length for installation. Both batts and blankets typically have an R-value of approximately R-3 per inch of thickness.

Rigid Board Insulation

Rigid board insulation is commonly made from fiberglass, polystyrene, or polyurethane and comes in a variety of thicknesses with a high insulating value (approximately R-4 to R-8 per inch). This type of insulation is used for reproofing work on flat roofs, on basement walls and as perimeter insulation at concrete slab edges, and in cathedral ceilings.

For interior applications it must be covered with 1/2-inch gypsum board or other building-code approved material for fire safety. For exterior applications it must be covered with weather-proof facing. Check the applicable codes to determine local requirements for covering rigid board insulation to achieve fire resistance.

Spray Foam Insulation

Spray foam insulation is a two-part liquid containing a polymer (such as polyurethane or modified urethane) and a foaming agent. The liquid is sprayed through a nozzle into wall, ceiling, and floor cavities. As it is applied it expands into a solid cellular plastic with millions of tiny air-filled cells that fill every nook and cranny. Spray foam insulation should be applied by a professional using special equipment to meter, mix, and spray into place. Spray foam insulation is commonly used for retrofits; it is good for irregularly shaped areas and around obstructions

Spray foam materials cost more than traditional batt insulation. However, since spray foam forms both an insulation and an air barrier, it can be cost competitive with batt insulation because it eliminates the steps for air-tightness detailing (such as caulking, applying housewrap and vapor barrier, and taping joints).

More information on spray foam insulation is available from the Department of Energy and ToolBase. 

RRay --- 20 years ago -

I got the blow in kind. Made a humungous difference. That stuff gets everywhere! I think the coverage is far more extensive than bat and it works fine. Mine is about waist deep up there. Looks like a Columbian Cocaine Cartel had a slumber party and left all the party favours ;>.........

But hey it works! 

Sakebomb --- 20 years ago -

Ray,

Who did you use? I tried to find the old thread but of course couldn't.

Thanks 

lotsmore --- 20 years ago -

Sakebomb,
I would like to know who did your ducts? and if it is very costly. I live in a home that is almost 40 years old and I think I need the same thing done. 

Sakebomb --- 20 years ago -

I have been using Egan & Hinson since 2002. They advertise on 610 AM. Their number is 713-666-1101. My house is 35-40 years old as well. They have replaced my a/c unit (2002), furnance (2005) and now ducts (two weeks ago) over that time span. As well as all my house calls and bi-yearly check ups. The ducts were the original ones in the house and I was losing a ton of energy cooling my attic. As soon as they were done I could tell a huge difference in the amount of air being pushed through. The cost wasn't cheap but not outrageous. They will come out and give you a quote and check over your system. Tell them you heard them advertise on the radio and you will get like 10-20% off. Anyway some people might be cheaper but they have always been upfront with me and haven't tried to rip me off over the years. 

Sakebomb --- 20 years ago -

Ray,

Who did you use? I tried to find the old thread but of course couldn't.

Thanks 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground