Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Lightening Cabinets

who's talking here?

RRay 2
rrazl 3
Sandyr9111 1
Big Red 1
ManicMom 4
Splendor 1
♥SATex♥ 2

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

ManicMom --- 19 years ago -

Is there a way to make my cabinets lighter? I don't want to completely sand them and refinish them, but the finish they have now are too dark for my preference. My next option is painting them, but I really like wood. 

♥SATex♥ --- 19 years ago -

you can put a stripper on them and a lighter stain. ( not a chick stripper) ha paint stores can help with this. 

ManicMom --- 19 years ago -

Wouldn't that involve completely stripping them and then restaining? I was trying to avoid all that work...hehe I was even wondering if a bleach/water mixture could be rubbed over them to lighten the stain. 

♥SATex♥ --- 19 years ago -

I don't know about the bleach/water, they have so many new products now that make it not as much work like in the past. It does sound good though about the bleach, just don't think that would work because there is a sealer on the stain. 

Splendor --- 19 years ago -

Wouldn't the bleach eat away at the wood? 

RRay --- 19 years ago -

first..... what type of finish do they have on them now..... as in.......is it a surface applied finish that lays on top of the base material (like paint, varish etc.) or is it a penetrating type of finish such as an oil based finish or a stain that permeats the base wood...... Before I can answer....this will need to be known...The procedures will differ. You can expect to sand either way. Preparation is 80 percent of getting good results. You can also plan on removing all the doors, the hardware and the hinges. be sure and mark every door. When I did mine it was a 4 day process. But boy did they turn out well. We started with dark mahagony and ended up with leaded glass inserts and a white lacquer rubbed finish. 

Big Red --- 19 years ago -

SO many times the ends of the cabinets just have contact paper on them. Be careful Good luck 

ManicMom --- 19 years ago -

or is it a penetrating type of finish such as an oil based finish or a stain that permeats the base wood...... They are solid wood with a dark stain on there and a light gloss on top. Many of the edges have been rubbed down to show the base wood. 

Sandyr9111 --- 19 years ago -

How about distressing them with some sandpaper and then reapplying a clear coat? And new knobs? 

rrazl --- 19 years ago -

let me email my brother & sister n law. He owns his own remodeling company and when they were over Christmas I was asking him about doing the same w/my cabinets....he told me there was something I needed to put on them first and them prime them....for me to pain them....I just can't remember what that first thing was. 

rrazl --- 19 years ago -

that's what I was thinking..but that sounds like a stripper and this wasn't a stripper I don't think 

rrazl --- 19 years ago -

That's IT!... 

RRay --- 19 years ago -

Check out this article I wrote on finishing Finishing forumlae Check out the rest of the website under articles for some more ideas... Your wood will have the most impact on the cabinet’s ultimate look. If you want a light look, for example, you might start with a light wood like ash, beech, birch, elm, oak, maple, or chestnut. In the mid-range, consider cherry with a natural finish. Or you can stain maple to be darker than its natural color. For your dark kitchen, you’d want to start with a wood that has a little color to it. But don’t start with a dark wood like walnut and try to lighten it. You can always darken the color of lighter woods, but it’s hard to go the other way. You can also consider clear finishes rather than stains on cherry, walnut, and other woods rich in color, such as butternut, mahogany, rosewood, and teak. A stain shouldn’t be confused with a finish. A finishing coat is applied over the stain to protect it. Typically, a stain will be coated with a catalytic-conversion varnish to give it durability and sheen—whether matte or high-gloss or anything in-between. When it’s baked on, the varnish catalyzes into a hard, protective finish. You don’t want to top the stain with oil, lacquer, or wax because those substances won’t hold up and will yellow over time. Glazes can be used as an overcoat to achieve certain effects, such as an antique look. My suggestion based on just your post and not knowing the type of wood....is paint. With paint you certainly have an endless palette of colors to choose from. You can also achieve a range of special effects. Paint can look smooth and glossy or it can be sanded, rubbed off, or dented with rocks to look distressed. But you should be aware up front that hairline cracks will appear at the joints of solid wood doors as the wood expands and contracts. (Over time, not right away....nothing major, just want to make you aware that this will occurr) Hopefully this will help and give you something to think about. Remember, you are in the kitchen every day and it is the focal point to your home. Spend the effort and the time it takes to do this right....It will cost you twice as much to redo an initial piss poor job that you just want to do easily and quickly...you will be rewarded with something you can be proud of. Regards, ray 

ManicMom --- 19 years ago -

Thanks Ray. I figured painting would be what I ended up doing. In about a year or two at the most, we will replace the cabinets. I just wanted something to spruce them up in the meantime. 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground