Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Anyone ever install your own wood/pergo flooring?

who's talking here?

Tylers Journey 1
Sugarplum fairy 1
Rubicon 1
RedMulch 2
sheddy 1
Sharticus 4
Peeking Boo 1
Oregonian 1

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

RedMulch --- 12 years ago -

How difficult is it? I'm replacing carpet and really trying to convince myself that I can handle it! 

Oregonian --- 12 years ago -

Easy if take your time to follow directions by Pergo or who ever. Don't buy cheap flooring material.Measurements are important.

Did 2200 sq ft in our last house and 400+ in this house.

Take you time----- plan what you are doing.
Also need a good "chopsaw" for trimming. 

RedMulch --- 12 years ago -

Thank you O....Oprah, Obama, Oregonian...lol I don't buy cheap anything. I only have 400 square feet in the upstairs to do. I will get that chopsaw......thanks 

Rubicon --- 12 years ago -

We did it ourselves. We used real wood. The only snag we had was that the glue was really messy! I highly recommend getting several boxes of disposable gloves if you are going that route and be very careful not to get it on your pants and then sit on your office chair! Yes, I am talking from experience! ;) 

Sharticus --- 12 years ago -

Also get a cheap table saw. Have the chop saw at one end of the room and the table saw at the other end. Keeps you from extra walking. Table saw is good for that last piece that's not exactly a whole board length wide and can be used as a chop saw as well. 

Sharticus --- 12 years ago -

Also make sure your room is square before you start. Any amateur can lay down wood on a perfectly square room. The expertise comes in when you are dealing with a room that isn't square. 

Sharticus --- 12 years ago -

One last thought. Invest in some good knee pads if you are going to do a big job. I laid 1700 sq. ft once and developed a bone spur on my knee cap. I still can't kneel down on that knee without a very painful feeling shooting through my leg. 

Tylers Journey --- 12 years ago -

We did it for the whole second floor and we got ours at floor and decor for less then a dollar a square foot and we are pulling our 10 year old pergo up to stain the rest of the concrete on the first floor. 

Sugarplum fairy --- 12 years ago -

Leveling.....the floor has to be level if your laying wood and using glue. Pergo and other laminates are floating floors. That would be your best bet for upstairs. We've done both wood and laminate. Wood was way harder. 

Sharticus --- 12 years ago -

You are right. I ignored the leveling and ended up with a couple of dead spots in my house. The average person may not notice it but I sure did. The installer always knows where they short changed their work. It may sound good at the time but it will haunt you long after the install is over. 

sheddy --- 12 years ago -

Get on you tube. There will a hundred people on there to show exactly what to do every step of the way. I can't believe people take the time give the blow by blow, but have have been thankful many times for their instructions. 

Peeking Boo --- 12 years ago -

We installed pergo and love it. It's work but not that big of deal if you just take your time, pay attention, and don't take short cuts.

YouTube and home depot were the biggest helpers. 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground