Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Water Heater Pilot Light Help???

who's talking here?

napoleon 1
tonyaust 1
toot 1
allycat 11
tinman 3
Gigix4 1
FabFive 2
kwgraniteguy 2
Emperor of Kingwood 3
80Vette 2

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

allycat --- 13 years ago -

Suddenly we have no hot water so DH checked the water heater and the pilot light went out. He said he gets it lit but it goes out almost immediately. Any tips? I don't want to take a cold shower :(! 

tonyaust --- 13 years ago -

As far as I remember you have to hold the pilot light button down for about a minute after it lights. Otherwise it goes out. 

tinman --- 13 years ago -

usually the culprit is one of two things.

Dirty pilot light

Bad thermocoupling.

Both are easy to fix. I suggest he turn the gas off at the appliance, and then clean the pilot light orifice.

If that doesn't work, go to home depot or a plumbing supply store and get a new thermocouple for your particular brand of water heater. 

Emperor of Kingwood --- 13 years ago -

one possible reason that the pilot wont stay lit, is that the thermocouple that senses heat from the pilot light and thus keeps the pilot light gas valve open has failed. This is a replaceable item. 

Emperor of Kingwood --- 13 years ago -

Tinman, you I need to open our own advice business. 

80Vette --- 13 years ago -

Look for a reset switch first. 

allycat --- 13 years ago -

Thanks for all the tips. My DH is going to check all of these, hope he can figure it out because he is not a handy man at all! 

allycat --- 13 years ago -

Oops! 

allycat --- 13 years ago -

DH can't figure it out so I'm gonna have to call someone. Who would work on this, a plumber? 

Gigix4 --- 13 years ago -

Who would work on this, a plumber?

That's who I would call. I've used Alpha Omega in the past - they were great. 

allycat --- 13 years ago -

I'm not sure if I want to call someone today and pay a fortune or just wait until tomorrow and pay a smaller fortune :(. GGGRRRRR!!! 

napoleon --- 13 years ago -

I'd wait til tomorrow. 

tinman --- 13 years ago -

Bob in Texas --- 5 hours ago - quote - hide comments

Tinman, you I need to open our own advice business.



LOL...

Allycat...it's the thermocouple and it is a ten dollar part that takes all of about 20 minutes to replace, start to finish.

A plumber is going to charge you about a hundy to do this. Thermocouplings to plumbers are like capacitors to a/c guys. Very inexpensive part and the affected appliance will not work without it. 

allycat --- 13 years ago -

Gosh, wish my dad or brother-in-law lived close. Boo for having to call a service tech! Waiting until tomorrow though. 

toot --- 13 years ago -

Have you tried looking up on the internet for help with figuring what's wrong? There are all kinds of videos, advice, etc. and how to on topics like this. 

allycat --- 13 years ago -

Yes, he watched some youtube videos. He has to go to work tomorrow so I'll have to deal with finding someone to come out. 

80Vette --- 13 years ago -

So, what was the problem? Hope u now have hot water! 

allycat --- 13 years ago -

No, I don't. Plumber supposed to be here between 4-5 and haven't shown yet. So frustrated and just want it fixed. Hope it doesn't cost a fortune :(. 

FabFive --- 13 years ago -

How did it go? So did he watch You Tube and still not figure it out or was that not the actual problem? 

allycat --- 13 years ago -

It's fixed! It was the thermacoupler (sp?) But also a pipe or tube had to be changed because of the age of the water heater. I'm just glad we didn't have to replace it! 

FabFive --- 13 years ago -

Great news! Hooray for a hot shower! 

kwgraniteguy --- 13 years ago -

Just curious whats the going rate for a thermacouple no days? 

allycat --- 13 years ago -

It pains me to tell you......$225! But I had to have hot water and it was better than replacing it. 

kwgraniteguy --- 13 years ago -

Ouch...... still better than replacement and you have hot water! 

allycat --- 13 years ago -

That's what I keep telling myself to ease the pain, lol! 

tinman --- 13 years ago -

allycat --- 8 hours ago - quote - hide comments

It pains me to tell you......$225! But I had to have hot water and it was better than replacing it.



Allycat....I'm glad you have hot water again, but that much for a thermocouple replacement is highway robbery. Did they charge you overtime rates because of the time of day?

I would raise about 6 different kinds of holy he** over that.

Thermocouples for furnaces, which is the same one used for hot water heaters, are under 20.00.

That means his labor and markup was right around 200.00

Again...highway robbery.

The only way I can see it costing that much is if the water heater is very, very, very, inaccessible. Like, in an attic, through a crawl space, over 20 years of xmas decorations, through a space time worm hole and then perched on top of Mt. Everest.

Oh...and this tube he speaks of, it the heater was making hot water ok before the thermocouple, then it would have been just fine after. 

Emperor of Kingwood --- 13 years ago -

I bet he told her either the overflow tube or catch basin drain tube had to be replaced to bring it up to code. Thats also BS. 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground