Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Front load washer issue....help!

who's talking here?

lizandmike 1
Tylers Journey 2
Sammee 1
SagaciousSighFiGurl 2
Mayberry 6
mispissy 1
snowprincess 1
crazydazey 2

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

Mayberry --- 14 years ago -

Does anyone have a REAL solution to the black mold that collects on the rubber gasket on front load washers? I've looked on the Internet and tried the suggestion of scrubbing with bleach... Running cleaning cycle, but still have BLACK mold! 

SagaciousSighFiGurl (Mod) --- 14 years ago -

I didn't buy one b/c of that issue. That was some time ago but I hear the newer generation ones don't have a lot of issues with that? Is yours an older one?

I know a few people who do have that issue. They do clean it with bleach, bleach is just the best thing to kill mold but I wonder if something natural like vinegar might work? Most people I know that have that problem leave the door open all the time to encourage air flow and drying. The reason mold develops is b/c it stays wet in there, that was clearly a design issue that proved to be a PIA. 

Mayberry --- 14 years ago -

Yes it's older. I've always left the door open so that little trick didn't work. I did see vinegar and baking soda on one of the web suggestions - I'll try that too (use that to keep my drains clean). 

crazydazey --- 14 years ago -

I have the same problem on my older front loader. I've tried it all to get it off, no luck. I'm beginning to think that replacing the rubber gasket is the only way short of getting a new machine. :( 

SagaciousSighFiGurl (Mod) --- 14 years ago -

Yes it's older. I've always left the door open so that little trick didn't work. I did see vinegar and baking soda on one of the web suggestions - I'll try that too (use that to keep my drains clean).


OY. That would make me nuts to have to be continually scrubbing that thing...It would be great if you could clean it out really good, and then spray something on it to make a barrier of some kind so water doesn't stay there and drains off. I bet somewhere out in DIY Land, there is something that would work..

You could mount a blow dryer on the wall...LOL! 

Mayberry --- 14 years ago -

Can you replace it? I'm all for that!!!! 

crazydazey --- 14 years ago -

Can you replace it? I'm all for that!!!! 

You can replace it, no idea what the cost of that would be. I guess I think that, if even bleach won't get the mold off, it's surely not affecting my clothes. I'm a clean freak but, for that reason, it doesn't worry me. 

snowprincess --- 14 years ago -

I have the same issue. The problem is that when you pull the rubber thing back to scrub it it sort of loosens and allows MORE water in the next time you run it.

My old top loader required almost NO upkeep- once a month I ran it empty with some vinegar and it was fine. The front loaders are a PIA. My particular model only lasts about 3.5 years according to online reviews (wish I knew this before spending so much!) and mine is almost that old. I can't wait till the part breaks so I can justify replacing it. I will go back to a top loader. 

Mayberry --- 14 years ago -

Not ready to replace the entire unit...need to limp along for at least another year. I'll see how expensive the gasket is.... 

Tylers Journey --- 14 years ago -

I clean mine out every month. I do a CLR load, bleach load, I take the drawer out to clean out the fabric softener buildup along with the mold buildup. I take vinegar soaked washcloth and let it sit in the rubber gasket for about a half hour and then wipe it out. 

Mayberry --- 14 years ago -

Great suggestion TJ - I'll try anything. Just can't imagine that some of this isn't getting on our clothes... 

Tylers Journey --- 14 years ago -

Great suggestion TJ - I'll try anything. Just can't imagine that some of this isn't getting on our clothes...

I always keep the door open and I think cleaning it monthly really helps. I don't have any smells in it at all. 

Mayberry --- 14 years ago -

Mine doesn't smell and I've always left the door open. I even clean the dispenser monthly, but I saw a few black spots on the gasket,(which I also wipe down between loads) but it wasn't until I started looking ALL around and in the gasket...then I realized the problem. Nasty... 

Sammee --- 14 years ago -

My father is a mold inspector. He says that regular household bleach (as well as vinegar, baking soda, etc.) does not kill mold spores, it merely makes them a nice white color. If the spore isn't killed, the mold will just keep growing back again and again. You must use the outdoor or professional strength bleach and it must have both of these ingredients: SODIUM HYPOCHLORITE and SODIUM HYDROXIDE. It can be found at Lowes or Home Depot (probably Ace), but Walmart and grocery stores do not carry this. Use it according to the directions on the bottle because it is very strong and will deteriorate your seal if left on longer than recommended or if it isn't diluted enough. 

mispissy --- 14 years ago -

Our first front loader had that problem. Our new one is 3 years old and has never had mold or odor. If you do replace the gasket, keep an old towel handy and just dry it after you're done with laundry for the day. 

lizandmike --- 14 years ago -

I leave a rag in my laundry room. Whenever I take the last load of the day out of the washer, I just wipe the excess water out of the seal. I drape the wet rag over the washer door nThen I leave the washer door open and shut the laundry room door. I've never had mold in my seal. 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground