Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Buying a laptop QUESTION

who's talking here?

MonzaRacer 3
Bliz 1
captureit11 1
tinman 3
RedMulch 1
BCSKW 2
IbarraFam222 1
TinktheSprite 9
LitlJay 7

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

TinktheSprite --- 14 years ago -

I want the best my money can buy. My little laptop is 6 years old and doing well. I could only hope for another 6 years from the new one. I am not a Gamer but on thing I notice over the years is a slower computer probably due to the smaller HD and processor, right? I know I can always add RAM. So these seem like the 2 things I should be investing in for the long haul.

Question:
Is it worth $100 more for 8 gig memory and 1 TB hard drive? vs 8 gig/750 GB? Both have i7 processors. 

RedMulch --- 14 years ago -

you get what you pay for............ 

TinktheSprite --- 14 years ago -

What do you mean exactly, Red Mulch? Are you saying there is a big difference between 750 GB and 1 TB? 

IbarraFam222 --- 14 years ago -

You can always buy a TB external hard drive! That's what I store all my music and photos on. My laptop basically has all it's storage capacity! I bought a Thinkpad after much thought and research and I love it! Best purchase I've made. I have an i5. 4 gb 2.7 ghz. It was $600. Bought it dec 2011. 

LitlJay --- 14 years ago -

Despite the current price hike in HDD's and SSD's due to the flooding in Thailand, storage and memory upgrades are cheap and easy upgrades that can be done any time.

I would save my money. Get the RAM upgrade if you feel you need it further down the line. It will never cost $100.

750GB and 1TB HDD's are enormous and way more than most users will ever need unless they store lots of movies/music/iso files/etc. I can imagine very few scenarios where 750GB wouldn't be more than enough for you.

If you mean business about performance and longevity, replace that slow HDD with an SSD. They are getting cheaper and faster all the time, so it may behoove you to wait a little while, but these days the hard drive is the biggest bottleneck in your computer's performance as well as the likeliest failure point and replacing it with an SSD is the biggest performance/reliability boost you can buy at any price. 

MonzaRacer --- 14 years ago -

Here's a little comparison in HDD and SSD...


 

TinktheSprite --- 14 years ago -

Thanks so much for the information LitlJay. SSD? Phew! I never thought to ever own one of those! Are they that close to making them available to us little people?? I am clear on the enormity of 750 GB and you are right, I don't plan on that much storage. But SSD, I am seriously needing to think about that! I brushed off having one a loooong time ago! 

TinktheSprite --- 14 years ago -

Hot damn, Monza! You make me want SSD! 

LitlJay --- 14 years ago -

I brushed off having one a loooong time ago!

A loooong time ago they were priced completely out of the consumer market, so I don't blame you.

Things have changed. They are well within reach now, faster and more reliable than ever.

I recommend OCZ Vertex 3 MAX IOPS Edition, whatever size you wish to pay for. They are about as fast as you can get without going to a PCIe drive. 

BCSKW --- 14 years ago -

867509: It all depends on what you want to spend. For the cost of a new 500gb SSD, you could probably buy a better laptop. They are very expensive. I recently read an article that suggests that SSD's are much more sensitive to shock (a bang or knock) than the ATA/SATA drives.
I have seen some computers with the new ssd's and there wasn't much to be impressed with. There was a noticeable increase in performance but not enough to cost from $300 to $700.00. But if money isn't an issue, then by all means, go for it. 

MonzaRacer --- 14 years ago -

Hot damn, Monza!


Nevermind...I was reading that as "Damn, Monza's HOT"... 

LitlJay --- 14 years ago -

Nevermind...I was reading that as "Damn, Monza's HOT"...

Surely they were talking about your car. 

MonzaRacer --- 14 years ago -

Surely they were talking about your car.

Yeah, that's it...and don't call me Shurly...LOL 

BCSKW --- 14 years ago -

lol 

Bliz --- 14 years ago -

Cost per GB for SSD is too high for me, and I also heard that they were less reliable over the long haul compared to traditional hard drive. I would spring for the 7200RPM hard drive instead of 5400RPM for speed though if it was available because it helps, and should not be too costly. Max out RAM, and make darn sure that the laptop does not run hot. If its warm at the store when you put your hand on the keyboard, its a bad design and will fail too quickly (Dell and HP are notorious for this in their less expensive models). I have so far had good luck over the past 3 years with Lenovo and Toshiba laptops. Good luck! 

TinktheSprite --- 14 years ago -

Thanks Bliz. Had my eye on 7200 RPM's. But how fast do I need to be to do what I do? Not that fast because my own brain is slowing down and heaven forbid my computer thinks faster than I do. :) Kidding. I am looking at that, too.

Thanks for all your opinions. I appreciate it. I have it rounded down to a few. 

TinktheSprite --- 14 years ago -

Ok I can upgrade to 7200 rpm for $70
Upgrade to 160 GB SSD for $250. The 7200 is a no brainer. It's a go. I can't find the name of the SSD but IDK if it's worth it? Plus I don't like to be the "first on my block" with technology. 

LitlJay --- 14 years ago -

SSD's come in a lot of flavors. $250 is pretty high for 160GB, so it had better be a pretty high-end one for that many bucks (SF228X controller, synchronous NAND chips, etc.).

It sounds like you are spec'ing a dell or similar. I'd get (and this is just me) the cheapest drive option they offer, then get an OCZ MAX IOPS 120GB SSD for about $200. You can switch it in yourself easily using FOSS software like PING or Clonezilla. 

captureit11 --- 14 years ago -

GET A MAC COMPUTER. 

TinktheSprite --- 14 years ago -

My work uses Windows and isn't MAC friendly. They don't guarantee results on a MAC. Sucks, I know. They are behind the times. 

TinktheSprite --- 14 years ago -

Alright. I dove in and did it.
i7
8 gig upgradeable to 16 gig RAM
750 MB HDD @7200 rpm
Blu Ray
HDMI connection to HDTV
That's all I care about. :) Me happy. Thanks for all your help and info. 

tinman --- 14 years ago -

Ok 867....

Which brand did you buy?

Where did you buy it?

How much did you give for it? (if you don't mind discussing that)

I too am in the market and the rig you described in your last post is pretty much what I want too.

I store a lot of blue prints and use a blue print reader extensively so lots of ram is important to me. 

TinktheSprite --- 14 years ago -

Tinman, PM for you. 

LitlJay --- 14 years ago -

I store a lot of blue prints and use a blue print reader extensively so lots of ram is important to me.

CAD, PDF, or TIF files? You need big storage for those, not RAM (and they aren't actually that big unless you have buttloads of them).

If it is largely CAD files, you'll need mega-RAM for most CAD software (I've been using AutoCAD since 1993), but PDF and TIF viewers have very minimal memory requirements. A lot of simple DWG and DXF are pretty lightweight and don't require much RAM, either. 

tinman --- 14 years ago -

Every so often I have to deal in a dwg format, but for the most part, I use the reader for tif and pdf. Back in the day, I needed more memory because the program I used was so bulky, but that's not an issue anymore. Also, the new gen readers have become better at scaling based on paper size rather than plan landmarks.

Where I run into major memory issues is when I have to over lay files for line weights and conflicts.

Again, not a real test for my current reader, but 10 years ago, it was an issue. 

LitlJay --- 14 years ago -

What reader do you use?

There's some pretty nifty ones out there these days, most of which are cheap or free.

I laugh when new customers show me how they use the crud built into windows to view/print TIF files when they get them. I show them Brava or the ChicagoTIFViewer (i had a customer with a lot of contracts in that area) and they act like I showed them a map to the holy grail. 

LitlJay --- 14 years ago -

We also service plotters too, by the way.

What model do you have, if you have one? 

tinman --- 14 years ago -

No plotter...If I need copies, I get them made at Kinkos. Cheaper in the long run than keeping and maintaining a plotter. I used to have an IBM plotter and scanner combo. That cured me from owning plotters and scanners.

As for the reader, I use a product called On Screen Takeoff. They offer a free version for viewing tiff and pdf files and the scaler works great in both formats. 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground