Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

TV repair person

who's talking here?

~grandma again~ 1
tinman 3
RedMulch 2
Gigix4 1
susie q 1
Erik the Red 1
Tipsyhic 1
Aah Grasshoppa 9
YoMomma 4
SagaciousSighFiGurl 3
Captain Hindsight 1
davetec 2

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

Aah Grasshoppa --- 15 years ago -

OK, my giant Mitsubishi rear projection HD TV has a blinking green light on it. Internet says it is probably a capacitor and is an easy fix. But they don't know me... Anyone know a relaible TV repair person who could fix this thing? Look like it shouldn't be too expensive. I hope. 

SagaciousSighFiGurl (Mod) --- 15 years ago -

We used these guys. They seemed to do a good job. Came to the house and carried off the tv after determining they couldn't fix it in house. They brought it back a few days later good as new. With those big tv's it's nice to have that service.
There is also a coupon for 25.00 off big screen repair, click the coupon link.

Bammel TV 

davetec --- 15 years ago -

Before you spend the money for a service call. You should try resetting the processor. This is accomplished by unplugging the TV from the AC for 15 minutes and then plugging it back in. Then turn the TV back on. Many times this will clear the problem. 

Aah Grasshoppa --- 15 years ago -

Thanks dave. Gonna try it. SFG, thanks for the recommendation. I'll call em if the other doesn't work. 

Aah Grasshoppa --- 15 years ago -

Didn't work, dave. I figured it wouldn't. Oh well.

Any other suggestions? 

tinman --- 15 years ago -

Brian

I know nothing about tv repair, but I know an awful lot about a/c repair.

Replacing a capacitor is extremely simple and anyone with a screwdriver and a pair of pliers can do it.

First thing you need to do is identify what the capacitor looks like. You can do that by looking up the new one online and then studying the picture of it. Then take the back off of your tv and see if you can see the capacitor.

If you can see it, then you should be able to get to it. Unhook the wires that are connected to it, making note of what wire went where (just in case that matters. it shouldn't matter, but you never know) and make the switch.

Don't be afraid of messing up. The tv is already broken and capacitors are extremely cheap. If the tv is unplugged while you are working on it, then you shouldn't have to worry about shorts.

I bet you can do this. 

Captain Hindsight --- 15 years ago -

Any other suggestions?
Hey: Just unscrew the back. Look at the tops of the capacitors. Find the ones with the bulging tops and replace them. That's about all there is too it. 

Aah Grasshoppa --- 15 years ago -

Where can I buy one of those capacitors? 

SagaciousSighFiGurl (Mod) --- 15 years ago -

Go for it, Brian. Put on those Crocs for good luck and make us proud!!!


And I bet you'll save a bundle.:) 

Aah Grasshoppa --- 15 years ago -

I'm gonna try. It's the Mitsubishi WS-73909. Looking for the capacitors now.... 

tinman --- 15 years ago -

Here you go young man.

Should be a piece of cake now.

You probably should also do a search on youtube. You would be amazed at the how to videos on that site.

Mitsubishi Capacitor Kits 

RedMulch --- 15 years ago -

You need to buy a flat screen Samsung HDTV LED and hang it up and forget it......... 

tinman --- 15 years ago -

Redmulch....

Have you been happy with your LED tv?

I bought the Samsung 55" LED when it came out and I just haven't been as happy with it as I thought I would be. My major complaint is with the darkness. It just doesn't do a very good job with dark scenes.

The plasmas are by far and away the best picture inho. Now that they have solved the power consumption and heat problems, I really wish I had purchased one.

Oh...and one more thing. I just saw my 55" Samsung LED that I paid $2,100.00 for on sale for $900.00. Of course...I bought mine two years ago...but still.

LOL 

susie q --- 15 years ago -

I'm still using my 65 ft. Toshiba, which fits into my entertainment center, But my son says is outdated. It's about 10 years old, and I only remember once that we had to repair it, and that was in KW. Sorry, but it's what I'm used to and like and I say at my age, almost 76, leave me alone and let me have what I'm used to and want. He even offered to buy me a new TV, and I said no thanks. As long as this works, I'll use this one.Brian, I hope that you can save yourself some money and do it yourself. Some of those guys should be offering to help you, not just give free advice. Two people can do repair work, maybe better than just one. 

Aah Grasshoppa --- 15 years ago -

My nephew is coming over later this evening and has offered to help. Haven't located the capacitors yet. 

Gigix4 --- 15 years ago -

65 ft. Toshiba
That is one hella' of a TV! 65 ft would take up most of my yard! 

davetec --- 15 years ago -

I owned a TV repair shop for many years. I no longer work in the business, but obviously have a lot of familiarity.

A typical project TV has hundreds of capacitors. Knowing exactly which capacitor might be bad is not something the average person can determine. Even if you could identify the bad part do you have the equipment and skill to unsolder the old part and solder the new one in without damaging the circuit board or the new part?

Electrolytic capacitors are the type that most commonly fail. Their electrolyte material dries out over time causing the capacitor’s value to change until the circuit stops working. Electrolytic capacitors look like little cans covered with a colored plastic heat shrink material. The top will be silver colored metal. Capacitors are rated in micro farads with a maximum voltage range. Those values are printed on the side of the capacitor.

All that said if the TV was in my shop the first thing I would look for is broken solder connections. Broken solder connections are the most common cause of problems. But even then, unless you are familiar with soldering on circuit boards, have the correct type of soldering iron, and solder, it should be done by a professional.

I think you’re at the point of needing to call a repair man, or just buy a new TV. 

~grandma again~ --- 15 years ago -

brian, it is getting close to football season. you might as well suck it up and go buy a new tv. that is my suggestion. we did just that. 

Aah Grasshoppa --- 15 years ago -

I'm gonna try to repair this one first. It is huge and perfect for football parties. Wish me luck! 

YoMomma --- 15 years ago -

OK I need help changing out my yboard on my samsung hpt5054 any suggestions :)gonna try and do this myself if I can figure out what the yboard is and make sure I dont kill myself! my problem is sound but no picture. I think this is my problem.

problem 

Erik the Red --- 15 years ago -

Erik says a broken TV is a blessing in disguise.

Erik says don't fight it, go with it.
 

Aah Grasshoppa --- 15 years ago -

Got mine fixed. $430. No way I could have fixed it myself. 

YoMomma --- 15 years ago -

Got mine fixed. $430. No way I could have fixed it myself

who did you call? how much was just labor ?
I called Bammel but they want $100 just to come out and look at it, 

Tipsyhic --- 15 years ago -

A typical project TV has hundreds of capacitors. Knowing exactly which capacitor might be bad is not something the average person can determine. Even if you could identify the bad part do you have the equipment and skill to unsolder the old part and solder the new one in without damaging the circuit board or the new part?
We are not a bunch of dummies here. I fixed my Phillips plasma by replacing the capacitors myself for nine dollars. They quoted me $350.00. BS that's all I have to say. 

YoMomma --- 15 years ago -

I fixed my Phillips plasma by replacing the capacitors myself for nine dollars. They quoted me $350.00. BS that's all I have to say.

although mine is not the capacitor I feel I can do this myself. I just am scared to buy the part and it not be the problem and I have wasted $250 

Aah Grasshoppa --- 15 years ago -

I used Bammel. A technician named Neville fixed it in about 45 minutes. I watched him do it- apparently I'm a dummy because I could never have done that myself. 

YoMomma --- 15 years ago -

bumping to see if there is anyone else who can help me. 

RedMulch --- 15 years ago -

Redmulch....

Have you been happy with your LED tv?

Sorry i missed this......i must have left and the thread got buried cause i don't ignore (or at least good people) I absolutely LOVE this TV. No plasmas for me yet...EX(husband) and i bought a 50" plasma. Moved from Apt. to house and he rehung it on the wall and busted one of the gas chambers (or whatever they are) and ruined the entire 4K in a single second..........

My Samsung has gone strong for 5 years now. their life is measured in hours, so it might outlast me since it's only on 2 hrs a day and maybe 6 on weekends and 9 during college football season......... 

SagaciousSighFiGurl (Mod) --- 15 years ago -

I called Bammel but they want $100 just to come out and look at it,


Wow, prices have gone up. When we used them, like 3 years ago, it was only 50.00 and that fee went toward your total repair bill. They are good techs tho, I'll say that.

The tech who was here was visiting with us and said the plasmas don't last very long the way tube TV's did in the past.. A few years, he said, before it goes bad and it will almost be cheaper to buy new than to fix if the important parts go on the fritz. The plasmas life is measured in hours of use. Best tip he said is to NOT leave them on when no one is watching or if you just want the noise....wasting precious hours of life! 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground