Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

93 Ford Taurus mechanical ???

who's talking here?

Jen 11
planemom 1
Sandyr9111 1
Mr Mark 1
SuperFantastic 1
Nick 2
~Scotch~ 1
Tipsyhic 1

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

Jen --- 16 years ago -

My Mother gave my son, my Dads 93 Ford Taurus V6 3.0 with 108K miles on it. A couple of weeks ago, it started and ran just fine. Then suddenly, it died. My husband is very mechanically inclined and fix nearly about any thing and he has about every tool ever made. But he is stumped on this. It starts, but engine does not turn over. You can hear it trying to start, but it is not getting a spark, when you do. Almost sounds like you would flood it, if you try to many times. Lights work fine. He has checked every part and even replaced electronic boards, and many other parts.

You can clearly hear it trying to start, it is just as if the engine is not turning over???

Any ideas? Thank you! 

Jen --- 16 years ago -

Thank you sooooooooooo much Steve! 

planemom --- 16 years ago -

My only suggestions would be the starter or alternator. 

Sandyr9111 --- 16 years ago -

My suggestion would be to hook a code computer up to it and see what codes it throws. 

Jen --- 16 years ago -

here is my DH response:

So far I have replaced the plugs, wires, coil, cap & Rotor, they were worn 100K + on them. Still no spark to the Coil. I traced the wires from the spark control mod to the coil itself. The wire is good but still no spark to the Coil. This is on the 3.0 that does not have a Crank sensor. I also heard about the Neutral Safety switch causing a no fire condition. So I also replaced that.
When we got the car the ignition switch was broke so I replaced it. The car worked for some time after that.

I greatly appreciate you help. I'm really stumped with this one.
 

Jen --- 16 years ago -

Steve-he is hubbys response-THANK YOU :)

As far as I can tell? Yes. I have a tester and have constant power to the top row of wires to the mod. I did trace pin #13 to the coil from the mod (red/silver stripe). Put 12volts to it to confirm it was solid, it was. also have a fuse tester, checked all in the firewall/engine compartment they are good also for good measure checked the one in the cabin under the dash also all good.
One part in question though. just below the distributor cap is a small rectangular part don't know what it is. But it seems to be part of the ignition system just by judging it's being attached to the distributor stem. it has a connection on it. If I remember correctly 6wires on it.

Again thanks for any input.
 

Jen --- 16 years ago -

Thank you for any advice :) 

SuperFantastic --- 16 years ago -

93 ford taurus



thats the problem 

Jen --- 16 years ago -

Well, free is free as my 16 year old said, when Grandma gave him Grandpa's car. (Who passed away 5 years ago) 

Nick --- 16 years ago -

One part in question though. just below the distributor cap is a small rectangular part don't know what it is. But it seems to be part of the ignition system just by judging it's being attached to the distributor stem. it has a connection on it. If I remember correctly 6wires on it.
Thats the ignition control module and it does effect the spark . You replaced plugs wires and dist. , correct ? Did you set the dizzy in on top dead center of #1 cylinder and the #1 spark plug connection ? Its kinda dumb question but it is easily a looked over step . 

Jen --- 16 years ago -

Thanks Nick! Will have him check that out! 

~Scotch~ --- 16 years ago -

Ford also has a module inside the distributor, that can only be replaced, by removing the entire distributor, pulling the drive gear and dis-assembling it.
Also, does the neutral safety switch (on top of the tranny) have a "timing" mark? 

Jen --- 16 years ago -

Thanks Scotch, I will pass this to my husband too. ny suggestions are appreciated :) 

Mr Mark --- 16 years ago -

I do not know if that year model incorporated coil ingnitors instead of a single distributor, if it did then he should also check the supply voltage to the coil packs.

If he is getting supply voltage to the coils then have him check to see if it has a "crank sensor" That would be used to send a signal to fire the coils.


Good call Steve. Dont forget to check plugs and wires 

Jen --- 16 years ago -

Thank you Mr Mark too! 

Nick --- 16 years ago -

I was also thinking have yall checked the fuel filter ? If its not letting enough fuel through it will cause the care to sputter and bog out 

Jen --- 16 years ago -

Thanks nick! 

Tipsyhic --- 16 years ago -

Check the fuel pump. I think Fords are a good product. My Windstar has 263K on it. Same engine and trans. I just srevice it every 40K and flush everything. 

Jen --- 16 years ago -

Thank you Tipsy! 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground