Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Advice Re: Getting Wood Floors in our Bedroom

who's talking here?

bettyb 2
Zionist NightOwl 3
Mygirl01 3
Unichic™ 1
Jpgirl 3
doglady 2
just lisa 1
tennis anyone? 4
Tipsyhic 2

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

tennis anyone? --- 16 years ago -

We have decided to get hardwood floors in our master bedroom. I would love to hear your experiences, recommendations, etc. What showrooms are in the area? I am trying to compare real wood Vs the Engineered wood floors. I think we have ruled out laminate. Also, currently our master bath is carpeted like our bedroom. We have a small threshold of ceramic tile in front of the tub and in front of the shower stall..and the toilet room is also tiled. The closets are in the bathroom are carpeted. So, we are going to do all tile in bathroom after getting the wood floors in the bathroom. So my question is..do people with tile bathrooms put tile in their closets? Thanks for any and all information. 

Tipsyhic --- 16 years ago -

Make sure they do a moisture check of the cement slab. If it tests high moisture it will need a moisture barrier installed. Try 6" wood slats walnut hand scrped and distressed. Do not buy cherry wood. Cherry wood oxidizes and will leave a stain under every rug you have. 

tennis anyone? --- 16 years ago -

Try 6" wood slats walnut hand scrped and distressed. I had heard these are harder to maintain and clean. I really like the look though. 

Tipsyhic --- 16 years ago -

Just do not get the Pergo. This is definently out. 

Mygirl01 --- 16 years ago -

We have Armstrong engineered floor in our master bedroom but it is upstairs. 

Zionist NightOwl --- 16 years ago -

We have engineered wood throughout our house except for the "wet areas"--kitchen, utility, dining, bathroom. We absolutely love it. No moisture problems with the slab, so we were able to glue directly to the slab. The engineered wood helps guard against humidity expansion by its nature of cross-ply which makes the layers pull against each other when they gain humidity. We've had ours for 5 years now with no inherent problems. I love the feel of real wood under my feet, and you shouldn't be able to tell the difference between a solid wood and an engineered wood once it's installed, since the top layer is real wood. We avoided the "floating floor" method which gives you a hollow sound when you walk on it; we used the glue-down method on our slab and a nail-down upstairs. We haven't tiled our master bath yet (waiting for funds to remodel); it currently has carpet. Since it's right in the bathroom area, I'm pretty sure we're going to tile the closet floors rather than putting in wood. 

tennis anyone? --- 16 years ago -

Great info, ZN. I am learning as I go. Everything I am reading is pointing toward the engineered wood..something I had never heard just a few days ago. 

tennis anyone? --- 16 years ago -

mygirl, where did you buy your armstrong? Are you happy with it? 

Jpgirl --- 16 years ago -

We have Armstrong engineered in our bedroom and love it. We put a thin pad and floated it-so no hollow noise. We've put in our own wood floors in Ohio and one room here. Right now we have 14 boxes of Bruce 3/4 prefinished, solid oak that we got on a great deal from Lowes last year-waiting to go into dd's room. With real wood you have to be able to nail into a sub floor-so if your bedroom is on a slab you'll play hell getting it in or have to build a subfloor. In Ohio I had 3/4 red oak in my downstairs including my kitchen and absolutely loved it. We had 3 dogs and it did need to be sanded and refinished after 7 years. Also never heard of the cherry staining-but I do know that any kind of rubber backed rugs will discolor the floor. The engineered floor wears a bit better with animals than the wood floor. We've got 2 dogs and the wood floor has scratches whereas the engineered floor does not-the wood floor having been in 1 year less than the engineered. They're both easy to put down if you have the right tools and can follow a straight line-you'll save a TON of money if you do it yourself. We bought this Bruce wood on super clearance and spent a total of 400.00 for the floor and tool rental. 

Mygirl01 --- 16 years ago -

mygirl, where did you buy your armstrong? Are you happy with it? I want to say at Home Depo, we did it ourselves. Be very careful if you are putting it directly onto the slab because wood can remove moisture from your foundation and cause it to crack. It is recomended to put down a moisture barrier or buy engineered wood with the moisture barrier already attached to the back side. Real wood can be glued into place, you do not have to nail it down into the subfloor or foundation. We have engineered wood upstairs through the hall and wood on the stair case, and we have three dogs and a cat that all live inside. Tile is downstairs and in all of the bathrooms. I will say that you will need to invest in a good vaccuum that is for hard floors a regular vaccuum will just throw stuff around the room! 

Jpgirl --- 16 years ago -

Be very very careful glueing real wood into place-I've seen some real disasters doing that-ESPECIALLY if it's not prefinished-some of the wood is warped and needs to be "persuaded"into place with a crow bar to keep it squared to the walls-no way glue is going to dry quick enough to keep the warped pieces in place. I would never glue a real wood floor into place. 

Zionist NightOwl --- 16 years ago -

no way glue is going to dry quick enough to keep the warped pieces in place. We had a great installer who threw out the warped pieces. If it's warped, then it shouldn't be installed under any method, but I would think the floating floor method would be the least desirable method for warped boards. Incidentally, for a floating floor method, you're supposed to glue every tongue and groove together before putting it down, (which I read online and was told by my installer), but some people skip that step thinking it doesn't matter. It really adds to the labor to do that step, but I would insist on it if I did go that route. 

Mygirl01 --- 16 years ago -

but some people skip that step thinking it doesn't matter. It really adds to the labor to do that step, but I would insist on it if I did go that route. Ya because if not anything you spilled would drip down into the cracks and you would never get it out and it could ruin the planks! Our floor in our room and upstairs hall is engineered wood and it is glued to the sub-floor (which was wood) and we glued all the seams as well. My daughters room is solid wood parquet and it is glues to the sub-floor (also wood) and glued at all of the edges as well. 

Jpgirl --- 16 years ago -

Ummm not sure why you'd glue tongue and groove 3/4" but dh and I have installed several wood floors. We don't float them we nail them with wood floor nails. We do throw the badly warped boards but I'm telling you there are no perfect boards-you'd have to buy twice as many boxes to get one box worth of un damaged wood. My husband is an engineer and a wood worker-a perfectionist. And nothing gets in the grooves as the floor is then finished with a polyurethane-there by sealing the top of the floor. From the damage I've seen done with glueing a floor down I would never do it. My prefinished 3/4" is so tightly nailed and so tight in the tongue and groove I don't worry about anything spilling or leaking. My engineered floor is floated on a vapor pad and in the 3 years we've had I have never had a problem with spills. As far as installers, we've lived here 7 years and have not found a contractor we would ever trust with our tile or wood floors. We had a couple of quotes and just from our discussion with them-they take the cheap easy way whenever possible. The wood floor in our living room was glued-did not stop the floor warping when we had a bit of water come in. The glue is not necassarily water tight. But man was it a pain to tear it up when the boards warped. This floor was installed by some fly by nighter. We ended up having to pour cement and level the floor before we could lay the tile-that was NOT a fun project. 

doglady --- 16 years ago -

We are going to do our master bedroom, bath, and closet. My husband did the engineered wood floors in our family and dining rooms. We were told to put "level-cure" on the slab before putting the wood down, by the owner of the company. I am very happy with our wood floors! We are doing engineered wood in the bedroom, and ceramic tile in the bathroom and closet and I am also going to do a "frameless" shower at the same time - and re-do the tile around our whirlpool tub, so that all the tile will match. Hopefully, we won't have to do this again! I HATE carpet - it is so nasty. Love, love the wood floors. It is alot to keep up with as far as dust goes, and dog hair (at my house), but when you think that all that dust and hair is in the carpet now - yuk!!! It is alot of maintenance, but at least you know it's clean. The real, solid wood floors would be awesome, but I know I couldn't stand all that sanding - I would have to move out to do it, and I am not doing that. Just have a little bit more saving, hopefully after the first of Jan. we will start this project :) I am sooo looking forward to it! 

just lisa --- 16 years ago -

I hate carpet too! We have allergies and I know getting rid of carpet would help..plus I like the look of wood floors. What company are you using doglady? (if you don't mind my asking). 

bettyb --- 16 years ago -

We just did hardwoods in dining, living, and master and hallway... and just love it... we used Showcase Carpets and floors on Northpark in Kingwood... very nice people, wonderful job... the guys that did the work were sooooo clean.. and really did an amazing job... when they left everynight I had no idea that workers were in my home... we used a floor that they have there known as Mardi Gras... that is the design name... it is a very mild hand scraped... you have to look real hard to see any changes in the texture of the wood... about 4 1/2" wide... and we would do it all over again... price reasonable... and again... this wood is one of the hardest woods, it is scratch resistant, etc... we are shopping for a rug for the master, just to have something warm to step on when we get out of the bed... but we just love our choice! good luck! 

bettyb --- 16 years ago -

We just did hardwoods in dining, living, and master and hallway... and just love it... we used Showcase Carpets and floors on Northpark in Kingwood... very nice people, wonderful job... the guys that did the work were sooooo clean.. and really did an amazing job... when they left everynight I had no idea that workers were in my home... we used a floor that they have there known as Mardi Gras... that is the design name... it is a very mild hand scraped... you have to look real hard to see any changes in the texture of the wood... about 4 1/2" wide... and we would do it all over again... price reasonable... and again... this wood is one of the hardest woods, it is scratch resistant, etc... we are shopping for a rug for the master, just to have something warm to step on when we get out of the bed... but we just love our choice! good luck! 

Zionist NightOwl --- 16 years ago -

Ummm not sure why you'd glue tongue and groove 3/4" but dh and I have installed several wood floors. We don't float them we nail them with wood floor nails. If you're using a nail-down method, then you DON'T glue the grooves. I'm talking specifically about the floating floor method for engineered wood, which is probably 3/8" thick or so. You glue the boards together to keep them nice and tight. Not necessary if you're doing a nail-down method (which I did upstairs) or a glue-down method, as they are held in place. But a floating floor needs something to be anchored to, so that "something" are the boards next to it. That's why you glue T&G when it's a floating floor method. That's all I was saying. The glue in the T&G, like I said, is to give more stability to the boards, not because of any fear of something spilling. The wood floor in our living room was glued-did not stop the floor warping when we had a bit of water come in. The glue is not necassarily water tight. But man was it a pain to tear it up when the boards warped. Very true. Wet engineered wood WILL warp and will most likely need to be replaced. The glue is on the bottom, so it's powerless on the wood that is getting soaked from a spill above it. We had a flood from a broken hose on our washer and had to have the living room floor torn up and replaced. And yes, it was a pain. That is one downside of having wood. But I can't see how having a floating method or a nail-down method would have changed that. 

doglady --- 16 years ago -

What company are you using doglady? Have had a couple of bids from some guys that I just found in my neighborhood - saw that they were working and asked them to come over for a quote - they didn't speak English - had to have a translator call me. I have their #, but no card - I will probably get a couple of other quotes before I make the final decision - will let you know. I think I a also going to call this company in Huffman - I think it is called Lakeside Floors? I have to get finished with Christmas before I can make a really good decision. Too much going on right now - but I can't wait to get started. :) I can't really tell what your name is on your post, but if you can tell me what it is, will be glad to let you know who I decide on. 

Unichic™ --- 16 years ago -

If you'd like some reasonable quotes, below showroom pricing, give me a PM. 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground