Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

anyone know who can fix a garage door opener?

who's talking here?

adam 1
mugglemom 1
GHYC 1
MonzaRacer 1
Itty Bitty Prints 1
offroad4by4 2
reh6110 1
Setta 1

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

adam (Wizard) --- 18 years ago -

i think it has to do with the sensors....i have to hold down the wall button to make it go down. ugh! 

Itty Bitty Prints --- 18 years ago -

Anyone who repairs garage doors can work on the opener as well. We had a problem with ours last summer. The plastic gears were worn down. He replaced them, and it has worked great since! I can't remember who we used. They were in the yellow pages. 

reh6110 --- 18 years ago -

I used Agape. They are in the phone book, but I don't remember their number. I have used them twice and both times they were prompt, called before they got there to tell me who was coming and were very polite, clean and considerate. I am single so for them to call and let me know who was coming and that they would be there within so many minutes was nice. 

mugglemom --- 18 years ago -

my dad had problems with the sensors and had to get a whole new opener. :( 

MonzaRacer --- 18 years ago -

1. My garage door will not go down using my transmitters. I can only get the door down by holding down on the wall button. When the infra-red sensors are malfunctioning, usually one of the sensor lights will be blinking. The problem is either due to a blocked path between the sensors, dirty eyes, loose wires at the sensors or at the motor head, or just bad sensors. The transmitters (remotes) will not work to close the garage door. You will find that the door will only move an inch or so in the close direction and reverse. When this happens your garage door will only close by holding down on the wall button, or wall console, until the door fully closes. This method is the only way to override the safety and close the door. To try and correct the problem, make sure the eyes on the sensors are clean, the wire connections are securely fastened at the sensors and motor head, and the eyes are directed at each other. Also, try unplugging the garage door opener and re-plugging the unit back into the outlet. This acts as a reset and may reset the sensors. If nothing works, it may be that you have to replace the sensors. You can find new sensors on our Web site in the category section or by going directly to Infra-Red Sensors. 

GHYC --- 18 years ago -

Tim at Ryan Services Good work and a Good price 832-466-8217 

Setta --- 18 years ago -

Hubby is having to fix ours...it broke one day when it was raising up...it's on his agenda for weekend repair stuff...he's not happy about it either...lol. 

offroad4by4 --- 18 years ago -

Quick check before spending $$$ and after checking into Monza's excellent recommendations + battery in the remote. Take one sensor off (mark where it was before you remove it) and place it next to the other one so that you know for sure they are lined up. Try the remote. 

offroad4by4 --- 18 years ago -

As a precaution, check around for bent rails or kid damage to the rails knocking the sensors out of alignment. 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground